Smeg SA611XA-1, Directions For Use Manual

Page: 9 / 12

9
WHAT TO DO IN CASE OF A PROBLEM
The hob or the cooking zone doesn’t start-up:

The hob is badly connected on the electrical network.

The protection fuse cut-off

The looking function is activated

The sensitive keys are covered of grease or water.

An object is put on a key.
The symbol [ F ] displays :

You cannot use this cooking zone anymore.

Call the After-sales Service.
The symbol [ E ] displays :

The electronic system is defective.

Disconnect and replug the hob.

Call the After-sales Service.
One or all cooking zones cut-off:

The safety system functioned

You forgot to cut-off the cooking zone for a long time.

One or more sentive keys are covered.

The pan is empty and its bottom overheated.
The automatic cooking system « go and stop
» doesn’t start-up:

The cooking zone is still hot [ H ]

The highest power level is set [ 9 ]

The cooking level was engaged with [ - ]
The control panel displays [ L ]:

Refer to the chapter control panel locking.
ENVIRONMENT PROTECTION

The packaging material is ecological and can be recycled.

The worn appliances contain certain noble metals. Apply to the local government about
the possibilities of recycling.

Don't throw your appliance with the household
refuses

Get in touch with the waste collection center of
your commune that is adapted to the recycling of
the household appliances.