Smeg SA611XA-1, Directions For Use Manual

Page: 7 / 12

7
Automatic cooking “go and stop”
All the cooking zones are equipped with an automatic “go and stop” cooking device. The
cooking zone starts at full power during a certain time, then reduces automatically its power on
the preselected level.

Start-up:
Action Control panel Display
Zone selection Touch key [ + ] [ 0 ] and control light on
Full power setting Touch key [ + ]
[ 1 ]…to…[ 9 ]
Automatic cooking Touch key [ + ] [ 9 ] is blinking with [ A ]
Power level selection Touch key [ - ]
[ 9 ] [ 8 ] [ 7 ]…[ 1 ]
(for example « 7 ») [ 7 ] is blinking with [ A ]

Switching off the automatic cooking :
Action Control panel Display
Zone selection Touch key [ - ] [
9 ] [ 8 ] [ 7 ]…[ 0 ]
Power level selection Touch key [ + ] Level selected
Timer (according to model)
The timer is able to be used simultaneous with all 4 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.

Setting and modification of the cooking time :
Action Control panel Display
Zone selection Press key [ + ] from the zone [ 0 ]
Increase power Press key [ + ] or [ - ] [ 1 ] to [ 9 ]
To select « Timer » Press key [ ] Timer [ 00 ] min
Decrease the time Press key [ - ]
[ 00 ] wents to 60,59…
Increase the time Press key [ ] The time increases
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts until the time reaches [ 00 ].

To stop the cooking time :
Action Control panel Display
Zone selection Press key [ + ] from the zone [ 0 ]
To select « Timer » Press key [ ] The remaining time
To stop the « Timer » Press key [ - ] and [ ] [ 00 ] then stops
simultaneously
If several timers are activated repeat the process.

Automatic stop at the end of the cooking time :
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound
rings.
To stop the sound and the blinking it is enough to press the key [ ].