Smeg S863VG3, Instructions For The Installation And Use, Page: 9 / 10

17
TECHNICAL CHARACTERISTIC TABLES
BURNERS
GAS
NORMAL
PRESSURE
NOMINAL
RATE
INJECTOR
DIAMETER
TAPE
BY-PASS
DIAMETER
NOMINAL
HEAT
INPUT (W)
N° DESCRIPTION mbar g/h L/h 1/100 mm 1/100 mm MAX. MIN.
2 SEMI-RAPID
G30 30 120 65 31 1650 600
G31 37 118 65 31 1650 600
G20 20 154 97 Reg. 1650 600
4 ULTRA-RAPID
G30 30 255 94 60 4000 2100
G31 37 250 94 60 4000 2100
G20 20 334 141 Reg. 4000 2100
The manufacturing firm refuses all responsibility for any possible imprecision in this booklet, due to
misprints or clerical errors. It reserves the right to make all the changes that it will consider necessary in
its own products, without affecting the essential characteristics of functionality and safety.
This product complies with EU Directive 2002/96/EC.
The crossed-out dustbin symbol reported on the appliance indicates that the appliance
must be disposed of separately from other domestic refuse at the end of its useful life.
It must therefore be delivered to a waste recycling centre specifically for electric and
electronic equipment or returned to the retailer at the moment of purchase of a new
equivalent appliance.
The user is responsible for delivering the appliance to the appropriate collection centre at the end of its
useful life, Failure to do so may result in a fine, as provided for by laws governing waste disposal.
Differential collection of waste products for eventual recycling, treatment and environmentally friendly
disposal helps reduce possible negative effects on the environment and health, and also enables the
materials making up the product to be recycled.
For more detailed information on the available refuse collection systems, refer to the local Municipal Solid
Waste disposal centre or the shop where the product was purchased.
Producers and importers are responsible for fulfilling their obligations as regards recycling, treatment and
environmentally friendly disposal by directly or indirectly participating in the collection system.