Smeg S863VG3 Instructions For The Installation And Use Download Page 5

13

13

INSTRUCTIONS FOR THE USER

CLEANING

Don't use a steam cleaner for the cleaning the 

hob.

It  is  advisable  to  clean  the  appliance  when  it  is 

cold.

Glass platform and enamelled parts

The glass platform and all of the enamelled parts 

must  be  washed  with  a  sponge  and  soapy  water 

or with a light detergent.

Do not use abrasive or corrosive products.

Do not leave substances, such as lemon or tomato 

juice,  salt  water,  vinegar,  coffee  and  milk  on  the 

enamelled surfaces for a long time.

Burners and racks

These  parts  can  be  removed  to  make  cleaning 

easier.

The  burners  must  be  washed  with  a  sponge  and 

soapy  water  or  with  a  light  detergent,  wiped  well 

and  placed  in  their  housing  perfectly.  Make  sure 

that the flame-dividing ducts are not clogged.

Check  that  the  feeler  of  the  safety  valve  and  the 

start-up electrode are always perfectly cleaned, so 

as to ensure an optimum operation.

The racks can be washed in the dishwasher.

Gas taps

The possible lubrication of the taps must be carried 

out by specialized personnel, exclusively.

In  case  of  hardening  or  malfunctions  in  the  gas 

taps, apply to the Customer Service.

Summary of Contents for S863VG3











Reviews: