background image

Table of Contents

3

EN

1 Installation

11

1.1 Cabinet clearances

11

1.2 Overall dimensions

13

1.3 Electrical requirements

14

1.4 Gas supply requirements

15

1.5 Burner and nozzle characteristics table

18

1.6 Conversion to Propane Gas (LPG)

19

1.7 Minimum adjustment

22

1.8 For the installer

23

WARNING: If the instructions in this manual is not
followed exactly, a fire or explosion may result causing
property damage, personal injury or death.

- Do not store or use gasoline or other flammable vapors or 

liquids in the vicinity of this or any other appliance.

- WHAT TO DO IF YOU SMELL GAS

•  Do not try to light any appliance.
•  Do not touch any electrical switch.
•  Do not use any phone in your building.
•  Immediately call your gas supplier from a neighbor’s 

phone. Follow the gas supplier’s instructions.

•  If you cannot reach your gas supplier, call the fire 

department.

- Installation and service must be performed by a qualified 

installer, service agency or gas supplier.

NOTE

This appliance must be installed solely and exclusively by a qualified

technician. Any technical procedures must be carried out by an authorized
technician.

Summary of Contents for RTU304GX























Reviews: