Instructions for Use
63
Refrigerator (A)
Refrigerator is used for storing fresh foods for few days.
Shelf (1)
(number depends on the model)
Shelf can be optionally placed on the guides inside the appliance. It is
protected against pulling out. If you want to remove it, slightly lift up the
back part and pull it out.
Glass shelves (some models only have them) are protected with plastic
spacers. Before pulling the shelf out, spacers must be moved towards
you. Spacers can be also removed, however, it is better to keep them
for any later transport.
Quickly perishable food should be stored on the back i.e. the coldest
part of the shelves.
Bottle rack
(in some models only)
Bottle rack (number depends on
model) is intended for storing the
bottles. There are two installation
positions available (horizontal or lifted
in the front) thus enabling the
positioning of bottles on the stopper as
well.
It is protected against pulling out. If you
want to pull it out, simply lift its rear part and pull it towards you.
Warning!
If the door contains storing shelves, install the rack in such position that
the length of the bottles will not hinder the closing of the door.
The rack may carry 9 bottles of 0,75 l or more at the maximum (total
weight max. 13 kg) – note the label underneath the thermostat box
inside the appliance.
Defrost Water Outlet (2)
The interior of the refrigerator is cooled with cooling plate incorporated
in the rear wall. Under the plate there is a channel and an outlet for
defrost water.
Regularly check the defrost water outlet and the channel, because they
should never be clogged (as for example with food rests). If clogged,
use a plastic straw and clean it.
