Instructions for the User
17
9.
Using the hob
Check that the burners, flame diffuser rings and
pan stands are fitted correctly.
The projections
A
on the flame diffuser rings must
be fitted into the recesses
B
in the burner. The
holes
C
in the burner must mate with the ignition
plugs and thermocouples
D
on the hob.
9.1
Fitting the Pan Stands
The pan stands are supplied dismantled from the hob. To place each pan stand on its
burner correctly, follow the instructions provided below:
Each pan stand must be positioned on the
corresponding burner in order to guarantee
proper operation.
Be very careful to match the different central
diameters of the pan stands to the flame-
spreader crowns.
To position the pan stand, you
first need to centre the fixing
pins (
1
) and (
2
) and then lower
it until it is resting on the hob.
At the ends of the legs of the pan stands there
are silicone gaiters with a hole that must be
centred onto the matching fixing pins on the
hob.
When properly positioned, the
legs of the pan stands must not
hang above the hob but should
rest on top of it.
Summary of Contents for PX 140 A
