Installation
21
EN
This built-in model requires a 3 mm deep
section to be routed out of the worktop
(detail “
B
” in the figure above).
Before positioning the appliance, the
insulating seal provided must be placed on
the routed section (
E
).
After performing these operations, fasten
the appliance in place with the dedicated
brackets supplied (
A
) in order to achieve a
perfectly flush mount, per the instructions
shown in the figure.
The brackets must be positioned
only after placing the cooktop on
the seal.
• Do not attach the cooktop with
silicone sealant, as this would
not allow subsequent removal
without damaging the
appliance.
• If using a laminate worktop, it is
advisable to prime the routed
groove with a suitable
proprietary product to protect
against water ingress.