Smeg Portofino CPF9IPBL Manual Download Page 4

Page: 4 / 66

Instructions

Risk of damaging the appliance

• Do not use abrasive or corrosive

detergents (e.g. scouring
powders, stain removers and
metallic sponges) on glass parts.

• Use wooden or plastic utensils.
• Racks and trays should be

inserted as far as they will go into
the side guides. The mechanical
safety locks that prevent them from
being removed must face
downwards and towards the
back of the oven cavity.

• Do not seat on the appliance.
• Do not use steam jets to clean the

appliance.

• Do not obstruct ventilation

openings and heat dispersal slots.

• Never leave the appliance

unattended during cooking
operations where fats or oils
could be released, as these could
then heat up and catch fire. Be
very careful.

• Never leave objects on the

cooking surface.

• Do not use the appliance to heat

rooms for any reason.

• Do not spray any spray products

near the oven.

• Do not use plastic cookware or

containers when cooking food.

• Do not put sealed tins or

containers in the oven.

• Remove all trays and racks which

are not required during cooking.

• Do not cover the bottom of the

oven cavity with aluminium or tin
foil sheets.

• Do not place pans or trays

directly on the bottom of the oven
cavity.

• If you wish to use greaseproof

paper, place it so that it will not
interfere with the hot air circulation
inside the oven.

• Do not use the open door to rest

pans or trays on the internal glass
pane.

• Cooking vessels or griddle plates

should be placed inside the
perimeter of the hob.

• All pans must have smooth, flat

bottoms.

Summary of Contents for Portofino CPF9IPBL



































































Search results

Summary of Contents for Portofino CPF9IPBL

Reviews:

Related manuals for Portofino CPF9IPBL

Brands by name

Popular brands

Smeg Portofino CPF9IPBL, Manual

Search results

Summary of Contents for Portofino CPF9IPBL

Reviews:

Related manuals for Portofino CPF9IPBL

Brands by name

Popular brands