User instructions
11
At this point the
PROGRAM PHASES
lights
(10)
will illuminate as the program progresses,
indicating the point reached in the washing procedure:
The light of the phase in progress will flash, and will remain
constantly on while heating is in progress.
END PROGRAM
When the program finishes, a buzzer sounds briefly and all the
PROGRAM PHASES
lights
(10)
flash. Press any of the
SELECTION
PROGRAMS
buttons
(2)
, stops the light flashins, and the
dishwasher is now ready to perform a new cycle; opening and
shutting the door or switching the appliance off and on has the same
effect.
INTERRUPTION OF A PROGRAM
In order to interrupt a running program it is necessary:
•
press
the
START/PAUSE
button
(5)
, the light of the current phase goes out;
•
keep the button pressed until the
PROGRAM PHASES
lights
(10)
come on (confirmation
buzzer).
TO CHANGE A PROGRAM
To change the running program it is necessary:
•
to interrupt the running program (see “
I
NTERRUPTION OF A PROGRAM
”);
•
select the new program;
•
to press again the
START/PAUSE
button
(5)
to make start the new program.
Prewash
Wash
Rinse
Dry
