User instructions
6
NOTES AND REFERENCES
Only
run the soak program with half loads.
Options
cannot
be used with the soak program.
The
ENERSAVE
option cannot be used with
soak
,
ultra clean
, or any programs
which do not include
the final drying stage.
*
Standard programme under
EN 50242
. The
ENERSAVE
option must
be
enabled
.
**
See information sheet provided
***
IEC/DIN
reference programme. The
ENERSAVE
option must
be enabled
.
****
Reference program for laboratories: Detergent:
20g
in the
dispenser
+
10g
in
the
door
or tablet.
Configuration
: see photo in “Using the baskets”.
(1)
Program consumption and duration figures have been measured in
accordance with the
EN 50242
standard. Values may vary depending on
intake water and room temperatures and the type and quantity of dishes
loaded.
(2)
1 or 2 cold rinses depending on the model.
REFERENCES
for the
ENERGY LABEL
supplied with the dishwasher:
-
Annual energy consumption is based on
280 standard wash cycles
with cold
water and consumption of low-energy operating modes. Actual consumption
depends on the way in which the appliance is used.
-
Water consumption is based on
280 standard wash cycles
. Actual
consumption depends on the way in which the appliance is used.
-
Information refers to the
EN 50242 STANDARD
programme (identified in the
programmes table), which is the most effective in terms of combined energy
and water consumption. The programme is recommended for dishes with a
normal level of dirt.
-
Drying efficiency class on a scale from
“G”
(minimum efficiency) to
“A”
(maximum efficiency).
