background image

General instructions

27

This appliance may be used by children from the age of 8 and by people of
reduced physical and mental ability or lacking in experience and knowledge,
provided they are supervised or instructed on the safe use of the appliance and
if they understand the associated risks.
Do not allow children to play with the appliance.
Do not allow unsupervised children to perform cleaning or maintenance
operations.

Do not let children go near the appliance when it is in operation or play with it at
any time.

Do not insert pointed metal objects (cutlery or utensils) into the slots in the
appliance.

Do not use steam jets for cleaning the appliance.
The steam could reach the electronics, damaging them and causing short-
circuits.

Do not modify this appliance.
Never attempt to repair the appliance. All repairs must be carried out by an
authorised technician or at an authorised service centre. The improper use of
tools can cause hazards.

Do not spray any spray products near the household appliance while it is in
operation. Do not use spray products while the appliance is still hot. The gases
contained in spray cans may catch fire.

The manufacturer declines all responsibility for damage to persons or things
caused by non-observance of the above prescriptions or by tampering with any
part of the appliance or by the use of non-original spare parts.

Summary of Contents for PGF31G-1





















Reviews: