User instructions
12
STARTING THE PROGRAM
To start the dishwasher, press the button of the
PROGRAM (2)
required
for a few seconds, until the light of the first phase of the selected
program starts to flash (confirmation beep).
As the program runs, the
PHASES/PROGRAM
lights
(5)
will indicate the
current cycle status.
A: prewash
B: wash
C: rinse
D: drying
The light of the phase in progress will
flash, while the lights of the previous and
subsequent phases remain on.
N.B.
during execution of programs which
do not include a prewash, the first
PHASES/PROGRAM
END OF PROGRAM
The beeper sounds briefly and all the
PHASES/PROGRAM
lights
(5)
flash to
indicate the end of the program.
Pressing one of the
PROGRAM SELECTION buttons (2)
stops the
lights flashing, and the dishwasher is now ready to perform a new cycle;
opening and shutting the door or switching the appliance on and off has
the same effect.
