User instructions
13
3.3 Washing
programs
The dishwasher is equipped with a control panel and an
INFORMATION
DISPLAY (9)
from which it is possible to carry out all the power switch-
on, switch-off and programming operations.
Before starting a washing program make sure that:
•
The water supply tap is
open.
•
The
correct amount of detergent
has been added to the
dispenser
.
•
The baskets have been
correctly loaded.
•
The spray arms are able to
rotate freely
and without
obstruction.
•
The dishwasher door is
securely closed
.
LIGHTING
Pressing the
ON/OFF
button
(1)
will start the dishwasher and will lit up
the dishwasher pilot light
(7)
. After approximately
3 second
from this
operation the
DISPLAY (9)
will be turned on with a visualization that will
depend upon the state of the dishwasher.
PROGRAMMING
All the programming operations are possible only with closed door. With
open door, on the
DISPLAY (9)
will appear
- - : - -.
SELECTION PROGRAM
The program selection is possible
through the relative buttons
(2)
.
By pressing the relative button of desired program (see table) it will lid up
the relative pilot light to confirm that the operation did occurred on the
DISPLAY (9)
will appear a program duration forecasting (“
h.mm
”).
