background image

12

12

EN

Adding laundry

If you want to add laundry to your machine 

after program begins press Start/Pause 

key for switching machine to pause mode. 

If water level in the machine is appropriate 

“door” led on program progress display 

is on and laundry can be added to the 

machine. If “door” led is not on after one 

minute than water level in the machine is 

not appropriate and laundry can not be 

added. You can press “Start/Pause/Can-

cel” key for continuing program. 

Cancelling a program

For canceling a program “Start/Pause/

Cancel”  key is pressed for three seconds. 

After this period “Start/Pause/Cancel”  and 

all other leds will be off .You can select a 

new program and start washing.

If cancel task is performed during washing 

“Spin” led on display will light on, machine 

will pump and when “Spin” led is off “door” 

led will be on, door can be opened and 

new program can be selected. 

After machine starts operation even if spin 

speed or washing temperature is changed, 

initial speed and temperature is valid. In or-

der to change spin speed or temperature 

after pressing “Start/Pause/Cancel”  new 

cycle or temperature can be selected. 

End of the Program

When program ends “ door” led will light 

on and door can be opened and machine 

is ready for next washing. Press “On/Off” 

for turning machine off. 

Emptying Laundry 

After program ends machine automati-

cally stops. Turn off tap water. Pull the 

handle and open loading door. Turn off 

your machine by pressing “On/Off”. After 

taking laundry out keep the loading door 

open and let the drum ventilate. Check the 

bellow and clean. 

Changing Program

You can use this feature for washing 

laundry in the same textile group for wash-

ing at lower or higher temperatures. For 

example, instead of Cotton60, Cotton40 

can be used. For selecting Cotton40 

instead of Cotton60 by pressing “Start/

Pause/Cancel” key machine is switched to 

pause position. Program knob is turned for 

selecting Cotton40 program. 

Even when the program selection knob 

is changed during the program initially 

selected program will be executed. For 

changing washing program continuing 

program must be cancelled. 

Although selected auxillary functions must 

be compatible with washing program.

Summary of Contents for LBS66















Reviews: