background image

150241

150241

 Manual wash

Very gentle program concluded with short gentle 

spin (max. 400 RPM).

It is suitable for washing fabrics from flax, silk, wool 

or viscose, marked accordingly for manual wash.

 Cold wash

Washing program for lightly soiled laundry of mixed 

fabrics (mixed quality of fabrics).

-  Selection of additional function  

( ,  ,  ,  ,)

Additional functions alter the basic washing cycle 

procedure.Particular function is switched on 

by pressing the relevant knob. The selection is 

confirmed with sound signal and switching on the 

signal LED above the selected function. If certain 

function is not available for the selected program, 

signal LED will not illuminate. 

The function is switched off by pressing the same 

button again - signal LED goes off.

 Select the particular function after the 

selection of the basic program, but prior 

pressing the START button (F).

 Pump stop 

 This function is switched on after the selection of 

a basic program by pressing the knob (E). It may 

also be switched on during the operation, prior 

last rinse. Indicator LED above the washing cycle 

symbol is lit.

 The program stops at the end of last rinse, prior 

spinning: laundry remains soaked in water and 

prevents crease, if you are unable to remove 

it from the drum immediately after the end of 

washing cycle.

 Indicator LED above the knob is flashing.

 The selected program is completed by pushing 

the START button (F), but you may also apply 

12

13

Summary of Contents for LB86

































Reviews: