EN
2
20
REMOTE CONTROL (OPTIONAL)
The appliance can be controlled using a remote control
powered by a 1.5 V carbon-zinc alkaline batteries of the
standard LR03-AAA type (not included).
• Do not place the remote control near to heat sources.
• Used batteries must be disposed of in the proper
manner.
Activation process of remote control Receiver
Before carrying out any activation of the remote control it is necessary to verify the correct func-
tioning of it. In the case that of the activation is necessary, please follow the below instructions.
This activation should be carried out exclusively from the hood control panel.
PROCEDURE
• Switch off the light and the motor.
• Press the
T3-
key for about 5 seconds until:
• the led
L3
flash twice to indicate the
ACTIVATION
of the remote control receiver;
• the led
L3
flash once indicate the
DISCONNECTION
of the remote control receiver.
