Smeg KSE920X Instruction Manual Download Page 10

EN

2

26

MAINTENANCE

REMOTE CONTROL (OPTIONAL) 

The appliance can be controlled using a remote control powered 
by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-
AAA type (not included). 
•  Do not place the remote control near to heat sources. 
•  Used batteries must be disposed of in the proper manner. 

Metal grease filters 

They can be washed in the dishwasher, and need to be cleaned 
whenever Button 

G

 flashes or at least once every 2 months use, 

or more frequently if use is particularly intensive. 

Resetting the alarm signal 

•  Turn the Lights and the Suction motor off, then disable the 24h 

function, if enabled. 

• Press button 

G

 and hold for approximately 5 seconds (See 

paragraph on Use). 

Cleaning the Filters 

•  Remove the filters one at a time holding them up with one 

hand and pulling the handle downwards with the other hand at 
the same time.  

•  Wash the Filters without bending them, and leave them to dry 

completely before replacing. (If the surface of the filter 
changes colour as time goes by, this will have absolutely no 
effect on the efficiency of the filter itself.)  

•  Replace, taking care to ensure that the handle faces forwards. 

Summary of Contents for KSE920X












Reviews: