EN
3
32
Fixing the Motor Unit
• Installation of the Motor Unit (
1
) at the front or rear must be de-
cided according to the position of the Kitchen unit, making sure
that the plug is properly positioned.
• Subsequently, according to where the air outlet opening has been
created on the unit, the Motor Unit can be turned by 90° at a time
so as to allow the air to come out on all 4 sides in correspondence
with the opening in Unit (
2
).
• Connect the connector from the Hood Canopy to
the Motor Unit connection.
• Screw the Motor Unit to the Hood Canopy using
the screws
12a
and
12b
provided as shown in the
figure.