EN
Installation
8
below and around the
area of installation of
the hood (wall or
ceiling) in order to
have better access.
Otherwise, protect the
furniture units and all
the parts involved in
the installation as
much as possible.
Select a flat surface on
which to place the
hood and the supplied
parts and cover it with
a protective cover.
•
Also make sure that
there is an electric
socket available in the
area in which the hood
is to be installed
(which can be accessed
even after the hood
has been installed) and
that it is possible to
connect to a device
that discharges the
fumes to the outside
(ducting version only).
•
Carry out all the
masonry work required
(e.g. installation of an
electrical socket
and/or a hole for the
passage of duct).
The hood is supplied with
expansion plugs for fastening
the hood to most types of
walls/ceilings. However, a
qualified technician should
verify the suitability of the
materials for the type of
wall/ceiling. The wall/ceiling
must be strong enough to
support the weight of the
hood.