
User Manual
GW1160 - GW4060 Series
Page 34 - 75
5
SETUP MODE - “FUNCTIONS”
The appliance has setup procedures for modifying its operating parameters.
The setup mode can be accessed by pressing the “Functions” button and requires a password.
For reasons of security and responsibility, 4 levels of password are available to access different levels of functions and
settings::
1.
USER Level (1111)
2.
SUPERUSER Level (provided by the installation engineer)
3.
ENGINEER Level
4.
SMEG Level
5.1
ACCESSING THE SETUP MODE / ENTERING THE PASSWORD
a.
Hold the
Functions
button (5) down for 5 seconds. 4 dashes appear on the display.
b.
Use the
Selection
buttons (4-8) to modify the individual characters of the password.
c.
Short press the
Functions
button (5) to move on to the next character
d.
Once the 4 characters of the password have been entered, confirm by holding down the
Start/Stop
button (3).
a.
If the password entered is correct, the system accesses the first menu item
b.
If the password is not correct, two
beeps
signal the error.
c.
5 seconds after the last button is pressed, the system automatically quits the Setup menu.
e.
Once the Setup mode has been accessed, the various
items
available can be scrolled using the
Functions
button
(5).
f.
Note on GW4060 series: a short press on the button
(6) has the same meaning of the short press on
button
Functions
(5) in the following cases:
a.
When entering password, to switch from one character to the next.
b.
Going into the setup mode, to scroll through the various items available.
4
fig. 24 –
Functions
button: hold down to access the Setup mode.
The
items
accessible from the
SETUP
menu are shown in the table below. To move on from one
item
to the next,
press the “
Drying
” button.
Setup Item
Description
Set
Appliance parameter setup - detailed explanation provided below in “Set” Parameters
Cloc
Date and time - detailed explanation provided below in “Cloc” Parameters