31
Instructions for the user
9.8
VAPOR CLEAN: assisted oven cleaning (on some models only)
VAPOR CLEAN is an assisted cleaning procedure which facilitates the removal of dirt. Thanks to this
process, it is possible to clean the inside of the oven with great ease. The dirt residues are softened by
the heat and water vapour for easier removal afterwards.
Before starting the assisted cleaning cycle, make sure that the oven does not contain any foods or large
spills from previous cooking operations.
Carry out assisted oven cleaning operations only when the oven is cold.
9.8.1 Before starting the assisted cleaning cycle
models
with
frames
Completely remove all
accessories from inside the
oven. The roof lining can be left
inside the oven (where present).
Remove the guide frames and
self-cleaning panels as
described in “9.5.1 Removing
guide frames and self-cleaning
panels (where present)”.
Pour approx. 40 cc of water onto
the floor of the oven (as shown in
the figure). Make sure it does not
overflow out of the cavity.
Spray a water and washing up
liquid solution inside the oven
using a spray nozzle. Aim the
spray towards the side walls, roof
and floor (The coloured zone
above shows where the solution
can be sprayed).
At the end of this process, close
the door and set the cleaning
cycle.
Do not spray excessive amounts of the water and washing up liquid solution. We recommend spraying
approx. 20 times at the most.
