Smeg FS9608AS-1 Manual Download

Page: 37 / 44

Installation

Burner and nozzle characteristics table

Overall dimensions

Location of gas and electrical connection
points.

5.4 Positioning

1 ULPG 2.75 kPa

AUX

Nominal gas consumption (MJ/h)

4.0

7.0

11.0

15.0

Injector (1/100 mm)

105

2 NG 1.0 kPA

AUX

Nominal gas consumption (MJ/h)

4.0

7.0

12.0

13.0

Injector (1/100 mm)

120

155

165

46 mm

660 mm

124 mm

41 mm

Heavy appliance

Danger of crush injuries

• Place the appliance into the piece of

furniture with the aid of a second person.

Pressure on the open door

Risk of damages to the appliance

• When positioning the appliance during

installation, do not use the door handle
to lift up or move this appliance.

• Never use the oven door to lever the

appliance into place when fitting.

• Avoid exerting too much pressure on the

oven door when open.

Heat production during appliance
operation

Risk of fire

• Veneers, adhesives or plastic coatings

on adjacent furniture should be
temperature-resistant (no less than
90°C).

Summary of Contents for FS9608AS-1













































Search results

Summary of Contents for FS9608AS-1

Reviews:

Related manuals for FS9608AS-1

Brands by name

Popular brands

Smeg FS9608AS-1, Manual

Search results

Summary of Contents for FS9608AS-1

Reviews:

Related manuals for FS9608AS-1

Brands by name

Popular brands