background image

Instructions

9

EN

1.3 Manufacturer liability

The manufacturer declines all liability 
for damage to persons or property 
caused by:
•  use of the appliance other than 

the one envisaged;

•  non-observance of the user 

manual provisions;

•  tampering with any part of the 

appliance;

•  use of non-original spare parts.

1.4 Appliance purpose

•  This appliance is intended for 

cooking food in the home 
environment. Every other use is 
considered improper.

•  The appliance is not designed to 

operate with external timers or with 
remote-control systems.

1.5 This user manual

This user manual is an integral part of 
the appliance and must therefore be 
kept in its entirety and in an 
accessible place for the whole 
working life of the appliance.
Read this user manual carefully 
before using the appliance.

1.6 How to read the user manual

This user manual uses the following reading 
conventions:

1. Sequence of instructions for use.
•  Standalone instruction.

Instructions

General information on this user 
manual, on safety and final 
disposal.

Description

Description of the appliance and its 
accessories.

Use

Information on the use of the 
appliance and its accessories, 
cooking advice.

Cleaning and maintenance

Information for proper cleaning and 
maintenance of the appliance.

Installation

Information for authorised persons: 
installation, operation and 
inspection.

Safety instructions

Information

Advice

Summary of Contents for FS61XNG8-1













































Reviews: