User instructions
13
3.2 Washing programs
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
EXTRA PROGRAMS
Button
(6)
gives access to
five extra programs
in addition to the ones
which can be selected directly using the program selector button.
This button must be pressed (the light comes on)
after
selection of the
“main” program (1,2,3,4 or 5).
This function
is retained in the memory
, so the button has to be pressed
again (the light goes out) if the user wishes to execute one of the 5 main
programs at the next cycle.
SELECTING HALF LOAD WASH
(available in all programs except the soak program)
This function is ideal for small loads and saves water and electricity. It is
controlled by the
HALF LOAD (10)
button, with two alternatives:
1) Press the button
once
to select washing in the
top basket
(the
relative light comes on);
2) Press the button a
second time
to select washing in the
bottom
basket
(the relative light comes on);
3) Press the button a
third time
to return to the normal
full load
washing
mode (washing in both baskets, both lights off).
When washing in the bottom basket only, the cutlery basket can be
divided so that only half is used.
