EN
32
BEFORE CALLING SERVICE
If your fridge is not operating;
•
Is there any electrical fault?
•
Is the plug is placed properly in the socket outlet?
•
Is the fuse of the socket outlet that the plug is plugged or the main
fuse blown?
•
Is the temperature setting is on correct level?
• Is there any fault in the socket outlet? Examine this by plugging your
fridge into a socket outlet which you are sure that is working.
If your fridge is not cooling enough;
•
Is the temperature setting is on correct level?
•
Is the door of your fridge opened frequently and left open for a long
while?
•
Is the door of fridge closed properly?
•
Did you put a dish or food on your fridge so that it contacts the rear
wall of your fridge so as to prevent the air circulation?
• Is your fridge filled excessively?
•
Is there adequate distance between your fridge and the rear and side
walls?
• Is the ambient temperature between the values specified in the
operating manual?
If the food in your refrigerator compartment is over cooled
•
Is the temperature adjustment right? (Is the refrigerator temperature
SR – Set value
blink on cooler
set value
screen
Refrigerator
comp. too Cold
The foods starts to
freeze because of
the too much cold
temperature
1. Check if the “Super
cooling mode” is on
2. Decrease
the refrigerator
temperature values
“--”
"Low voltage
Warning"
When the power
supply gets lower
than 170 V the
appliance gets to
steady position.
This is not a failure.
This prevents any
damages on the
compressor. This
warning will off after
the voltage gets
required level
