User instructions
34
POWER SWITCH-ON
In order to switch on the appliance just turn the
ON/OFF
selector
(2)
till it corresponds with the
letter
I.
TABLE FOR CERTIFICATION BODIES
Reference standard
EN 50242
Reference program
(*) Selector on
P6
+
ECO DRYING
Load
14 place-settings
Type of detergent
B
Amount of detergent
35 g
Rinse aid setting
Depending on the model 3/4 or 4/6
EN 50242
DISABLING THE END OF CYCLE ACOUSTIC DEVICE
It is possible to disable the sounding of the start/end of cycle acoustic device.
Proceed as follows:
•
press down the
HALF LOAD (4)
button for a few seconds until the symbol
bS
appears on the
INFORMATION DISPLAY (6)
;
•
press the
HALF LOAD (4)
button again to disable the acoustic device (the symbol
bN
appears
on the display);
•
press the
START/STOP (3)
button twice to exit the set-up mode.
To re-enable the acoustic device repeat the following procedure:
•
press down the
HALF LOAD (4)
button for a few seconds until the
bN
symbol appears on the
INFORMATION DISPLAY (6)
;
•
press the
HALF LOAD (4)
button again to enable to acoustic device (the symbol
bS
appears);
•
press the
START/STOP (3)
button twice to exit the set-up mode.
