background image

User instructions

36

DELAYED START

The start of the program can be delayed by 1, 2, 4, 6, 8 or 12 hours. In this way, it is possible to run
the dishwasher when most convenient.

Turn the 

DELAYED START 

selector 

(2) 

until it is aligned with the number of hours of delay

required before the program start.

This information automatically appears on the 

INFORMATION DISPLAY (6)

 as well. Then proceed

to select the program in the manner described previously: the dishwasher will immediately perform
a pre-wash cycle, and then automatically initiate the countdown of the delayed start programmed;

the 

INFORMATION DISPLAY (6)

 will show the time remaining to the start of the program.

TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT

 

Always try to run the dishwasher

 fully loaded

.

 

Do not wash the dishes in running water.

 

Use the washing program that is 

most appropriate

 for each type of load.

 

Do not carry out any preliminary rinsing.

 

If available, connect the dishwasher to a hot water supply up to 60°C.

 

When possible, 

disable the drying cycle

 and leave the door open at the end of the washing

cycle: the residual air and heat will dry the dishes perfectly.

TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT

The phosphates contained in dishwasher detergents are harmful to the environment. To avoid
using excessive amounts of detergent and to save on electricity, observe the following:

 

separate 

the more delicate items from dishes that are more resistant to aggressive detergents

and high temperatures;

 

do not pour 

 the detergent directly on the dishes.

STARTING THE DISHWASHER

After correctly carrying out all the preceding operations, to start the dishwasher simply press the

START/STOP (3)

 button for a few seconds, until the start cycle acoustic device sounds. The

INFORMATION DISPLAY (6)

 will show the duration of the program in minutes. The duration time

is only approximate, because it depends on the washing conditions (quantity of dishes, water
temperature, etc.), and is also continually updated as the washing program progresses.

The 

INFORMATION DISPLAY (6) 

shows the estimated duration of the washing program; if it

exceeds 

60 minutes

, the hours and minutes are displayed in alternation.

Summary of Contents for DWD1SSE-1





























Reviews: