User instructions
12
Notice for testing institutes
Testing institutes are provided with guidelines for comparative tests (e.g. according to
AS/NZS 2007). request the guidelines by contacting us at the following
e-mail address:
When making a request, please specify the model (MOD) and the serial number (S/N)
indicated on the plate on the side of the door.
3.2
Washing programs
Before starting a washing program make sure that:
The water supply tap is
open.
The
correct amount of detergent
has been added to the
dispenser
.
The baskets have been
correctly loaded.
The spray arms are able to
rotate freely
and without
obstruction.
The dishwasher door is
securely closed
.
Warning
:
during the initial phase of the washing program, the operation of sprayers
is not perceived because they start rotating about 5 minutes after the start.
This is the normal operation of the washing cycle.
SPREAD HALF LOAD
Suitable when there are not many dishes to be washed, it saves energy
and reduces the program duration. Place dishes in both baskets then load
the detergent dispenser than less than the normal amount for a full load.
PROGRAM DELAY
The start of the program can be delayed by
3, 6
or
9
hours.
This allows you to set the dishwasher to work at the times of day most
convenient to you.
After setting the program
, press the button to select
the delay you require; the corresponding light will come on. When the door
is closed, the appliance will prewash the dishes, after which the "program
delay" set will come into effect. If you wish to exit the procedure without
setting delayed start, press the button in sequence until all three lights are
out.
N.B.:
It is not possible to select the
PROGRAM DELAY
option once the
cycle has begun.
