User instructions
26
PROLONGED DISUSE:
•
Run the soak program twice in succession.
•
Unplug the power cord from the socket.
•
Leave the door slightly open in order to prevent the formation of
unpleasant odours inside the wash tank.
•
Fill the rinse aid dispenser.
•
Shut off the water supply tap.
BEFORE STARTING THE DISHWASHER AFTER PROLONGED
DISUSE:
•
Check that there are no deposits of sludge or rust inside the
water pipe: if there are, allow the water to run from the water supply
tap for a few minutes.
•
Plug the power cord back into the socket.
•
Reconnect the water intake hose and open the tap again.
TROUBLESHOOTING MINOR PROBLEMS
In some cases it is possible to remedy minor problems by referring to the
following instructions:
If the program fails to start, check that:
•
The dishwasher is connected to the electricity supply
•
There is no power outage
•
The water tap is open
•
The dishwasher door is properly closed
If water remains inside the dishwasher, check that:
•
The drainage hose is not kinked
•
The drainage trap is not blocked
•
The dishwasher filters are not clogged
If the dishes do not come out clean, check that:
•
The correct amount of detergent has been added
•
The salt container is not empty
•
The dishes have been loaded correctly
•
The selected program is suitable for the dish types and their degree
of soiling
•
All filters are clean and correctly installed
•
The spray arm nozzles are not clogged
•
There is nothing obstructing the rotation of the spray arms
Summary of Contents for DWAFI4510
Page 2: ......
