Smeg DRY63CS, Instructions For Use Manual

Page: 22 / 32

129530
129530
Strictly switch the appliance off prior
cleaning (unplug the power cord from the
wall socket, or turn the program selector
jog to the position “0”).
•
Clean the casing and drum interior with soft cloth
and mild detergent.
•
Periodically clean (vacuum) the interior of air
evacuation opening and evacuation tube.
Clean water condenser two to three times a year.
In case of frequent use of the appliance do it
even more often. Certain amount of water may
drip from the condenser when pulled out, so use
absorbing cloth for this operation.
•
Open the exterior lid of the condenser by grabbing
the handle on the lower left part of the appliance
housing and pull it downwards.
•
Remove interior hatch by rotating the lever
vertically down, tilt the hatch towards you and
remove it.
•
Turn the lock on the condenser upwards and pull
the condenser out by pulling the lever.
•
Clean the device from both sides with lukewarm
water and drain it well.
•
Before replacing it into its slot, clean the air
channel in which the device is mounted, and the
gasket at the interior lid.
•
Lock the condenser into its place.
•
Insert the inner lid to seal well and lock it with a
handle.
•
Push the exterior lid towards the appliance to lock
to its place.
22
23
Cleaning of evacuation
drier
Cleaning the water
condensation device