Smeg DRY63CS, Instructions For Use Manual

Page: 21 / 32

129530
129530
•
After every drying clean the filter, located in the
inner part of the door.
•
Lift the filter lid (Fig.).
•
Pull your fingers over the filter to remove fibers
and threads lining. Replace the filter cover (it must
snap in place at the bottom).
•
If necessary, also clean the filter housing and door
sealing.
If the filter is clogged in such way that it needs
washing, pull it out from its bed (Fig.), wash it under
hot water and dry. Be sure that the replaced filter
snaps safely to its position, and only then close the
filter lid.
If the filter is not regularly cleaned, the
airflow is obstructed, which causes longer
drying time and danger of overheating.
Empty the container and occasionally
clean the water condensation device.
Emptying the water containere
Empty the container after every drying procedure:
pull the container out, pull out the draining nozzle,
pour out the water and replace the container.
Water from condenser tank is not
drinkable! If filtered it may be used for
ironing.
20
21
Cleaning and maintenance
Cleaning the filter
Cleaning the
condensation dryer