User instructions
19
PROGRAM DELAY
The
PROGRAM DELAY
button can be pressed to delay the start of the
washing program by
3, 6, 9 or 12 hours
. This function allows you to set
the dishwasher to work at your preferred time of day.
After selecting the delay, start the program (see relative section).
The appliance will prewash the dishes, after which the “program delay” set
previously will come into effect (light indicating the time left before the start
of the program and light indicating the program set
flash
).
N.B.:
It is not possible to select the
PROGRAM DELAY
option once the
cycle has begun.
Flexi Tabs
Specifically for washing with combination detergents in
tablets
, which also
contain
salt and rinse aid
(3in1) or other agents such as glass protector,
steel rinse aids, etc. (4in1, 5in1…). When this option is selected, salt and
rinse aid will not be dispensed even if the relative compartments contain
them. If the containers are empty, the
lights
will remain
on.
With short programs, because there is less time for them to dissolve,
tablets may fail to wash effectively and undissolved residues may be left.
Powder detergents are more suitable for these programs.
If the option is not provided, we recommend the use of conventional
products (separate detergent, salt and rinse aid), because with
conventional washing cycles, combined products might create problems
such as a white deposit, poor drying results and residues left on dishes.
For further information, refer to the detergent pack.
With short programs, because there is less time for them to dissolve,
tablets may fail to wash effectively and undissolved residues may be left.
Powder detergents are more suitable for these programs.
IMPORTANT:
when no longer required, the option must be
deactivated
by pressing the
relative
button
(the light goes out).
