Smeg DFA12E1W Manual Download Page 17

Page: 17 / 47

User instructions

END OF PROGRAM

At the end of the program the beeper sounds briefly and
the program

lights

and

(marked "end") flash.

INTERRUPTION A PROGRAM

To interrupt a program in progress:



press the

START/PAUSE

button

(6)

; the light of the program in

progress remains on (confirmation beep);



you may now restart the program by pressing button

(6)

again until it

restarts, or change or annul the program (see "

HANGING A PROGRAM

or "

NNULLING A PROGRAM

").

CHANGING

PROGRAM

To change the running program it is necessary:



to interrupt the running program (see “

NTERRUPTION A PROGRAM

”);



select the new program;



start the program (see “

TARTING THE PROGRAM

”).

ANNULLING A PROGRAM

To annul the program, keep the

START/PAUSE

button

(6)

pressed until

the program is interrupted (light on and confirmation beep).

Press button

(6)

again and keep it pressed until the

program

lights

and

(marked "end") come on.

The water in the tank will be pumped out and the program will end at the
point where it was interrupted.

Summary of Contents for DFA12E1W
















































Search results

Summary of Contents for DFA12E1W

Reviews:

Related manuals for DFA12E1W

Brands by name

Popular brands

Smeg DFA12E1W, Manual

Search results

Summary of Contents for DFA12E1W

Reviews:

Related manuals for DFA12E1W

Brands by name

Popular brands