Smeg DF13FAB3CR User Instructions Download Page 3

Page: 3 / 52

User instructions

SHALL BE CONSIDERED IMPROPER.

THE

MANUFACTURER DECLINES ALL
RESPONSIBILITY FOR USES OTHER THAN
THOSE DESCRIBED ABOVE.

THE NAME PLATE FEATURING THE
TECHNICAL DATA, SERIAL NUMBER AND
MARKINGS IS VISIBLY POSITIONED ON
THE INNER EDGE OF THE DOOR.

THE

NAME PLATE ON THE INNER EDGE OF THE
DOOR MUST NEVER BE REMOVED.

DO NOT LEAVE THE DISCARDED
PACKAGING MATERIALS UNSUPERVISED
WITHIN THE HOME. SEPARATE THE
VARIOUS MATERIALS WHICH MAKE UP
THE PACKAGING AND TAKE THEM TO THE
NEAREST SORTED WASTE COLLECTION
CENTRE.

THE APPLIANCE MUST BE PROVIDED WITH
AN EARTH CONNECTION IN ACCORDANCE
WITH THE ELECTRICAL SAFETY
REGULATIONS IN FORCE.

THE MANUFACTURER DECLINES ALL
RESPONSIBILITY FOR DAMAGE TO
PERSONS OR PROPERTY RESULTING
FROM THE FAILURE TO EARTH THE

Summary of Contents for DF13FAB3CR





















































Search results

Summary of Contents for DF13FAB3CR

Reviews:

Related manuals for DF13FAB3CR

Brands by name

Popular brands

Smeg DF13FAB3CR, User Instructions

Search results

Summary of Contents for DF13FAB3CR

Reviews:

Related manuals for DF13FAB3CR

Brands by name

Popular brands