User instructions
13
Preventing the risk of clogging or damage:
if the water pipe is new or has not been used
for a long time, before connecting to the water
supply check that the water is clear and free of
impurities, to prevent damage to the appliance.
The dishwasher must always be connected
to the water system with new hoses; old or
used hoses must never be reused.
CONNECTING TO THE WATER
SUPPLY
Connect the intake hose to a cold water
supply with ¾” gas thread, inserting the
filter
A
supplied with the dishwasher.
Take care to screw the hose firmly into
place with your hands and then
complete by tightening about ¼ of a
turn with pliers.
In dishwashers equipped with the
ACQUASTOP device, the filters is
already fitted inside the threaded ring.
The dishwasher can also be connected to a hot water
supply
not exceeding 60°C
. Supplying the appliance
with hot water cuts down the washing time by
approximately 20 minutes, but slightly reduces its
effectiveness. Make the connection to the domestic hot
water supply using the same procedure described for
connecting to the cold water supply.
