USA
Safety Information
9
The electric connection is made via an omnipolar
switch, which is suitable for the intensity to be
tolerated and which has a minimum gap of 3mm
between
its
contacts,
which
will
ensure
disconnection in case of emergency or when
cleaning the crockery warmer. If a plug is used for
the electric connection, then it must be accessible
after installation.
The connection should include correct earthing, in
compliance with current norms.
Disconnect the appliance from the power
supply before carrying out any maintenance
operation
.
3 SAFETY INSTRUCTIONS
WARNING!
Before connecting the appliance compare the power data (voltage
and frequency) indicated on the characteristics plate with those of
the power supply in question. If these data do not match there may
be problems. In case of doubt, contact an electrician.
WARNING!
If the electrical wire plug is removed, the appliance must be installed
and connected by a technician. Contact a qualified electrician who
knows and respects current safety standards. The manufacturer
cannot be held responsible for damage resulting from fitting or
connecting errors.
WARNING!
The electrical safety of the appliance can only be guaranteed if it is
earthed. The manufacturer cannot be held responsible for damage
resulting from the absence of or defects in the installation’s
protection system (e.g. electrical shock).
