Instructions for the Installer
USA
21
12 INSTALLATION INSTRUCTIONS
12.1 Before installation
Check that the input voltage
indicated on the
characteristics plate is the same as the voltage of the power
outlet you are going to use.
Open the drawer and
take out all the accessories
and
remove the packing material.
Attention!
The front surface of the warming drawer may be
wrapped in a
protective film
. Before using the warming
drawer for the first time, remove this film carefully.
Make sure that the warming drawer is not damaged in
any way.
Check that the drawer opens and closes correctly.
If you find any damage, contact the Technical Assistance
Service.
Attention: the power socket should be easily accessible
after the warming drawer has been installed.
The warming drawer should only be built-in in combination
with those appliances indicated by the manufacturer.
If it is
fitted in combination with other appliances, the
guarantee is no longer valid since it is impossible to
guarantee that the warming drawer will work correctly.
12.2 Installation
To build-in the warming drawer in combination with another
appliance there must be a fixed, interim shelf in the housing
unit to support the weight of both appliances.
The appliance to be combined with the warming drawer will
be placed directly on the latter without any need to have a
separating shelf.
To build-in the appliance which is combined with the
warming drawer, follow the instructions set out in the
respective instructions and fitting booklet.
The relevant installation dimensions are indicated in mm
in
the diagrams shown at the end of this booklet
. Proceed
as follows: