background image

Use

74

Examples of possible combinations 
based on the set power

3.3 Using the ovens

Switching on the main oven

1. Select the cooking function using the 

function knob.

2. Select the temperature using the 

temperature knob.

Main oven functions

Power  

(kW)

Plate  

210 LH

Plate  

180 LH

Plate  

210 RH

Plate  

180 RH

7,4

P

7

P

7

9

P

9

P

4,5

8

8

8

8

0

P

8

P

P

7

0

8

3,0

8

0

8

0

0

P

0

P

7

8

0

8

0

8

7

8

Ensure that the programmer clock 
shows the cooking duration 

symbol 

, otherwise it will not 

be possible to turn on the oven.

Press the keys 

 and 

 at the 

same time to reset the programmer 
clock.

Static

As the heat comes from above and 
below at the same time, this system 
is particularly suitable for certain 
types of food. Traditional cooking, 
also known as static cooking, is 
suitable for cooking just one dish at 
a time. Perfect for all types of roasts, 
bread and cakes, and in any case, 
particularly suitable for fatty meats 
such as goose and duck.

Fan + lower element

The combination of the fan with just 
the lower heating element allows 
cooking to be completed more 
rapidly. This system is 
recommended for sterilising or for 
finishing off the cooking of foods 
which are already well-cooked on 
the surface, but not inside, which 
therefore need a little more heat. 
Perfect for any type of food.

Grill

The heat coming from the grill 
element gives perfect grilling results 
above all for thin and medium 
thickness meat and, in combination 
with the rotisserie (where fitted), 
gives the food an even browning at 
the end of cooking. Perfect for 
sausages, spare ribs and bacon. 
This function enables large 
quantities of food, particularly meat, 
to be grilled evenly.

Summary of Contents for Classica CG92IANT9















































Reviews: