1. At first use, or after a power failure, the appliance always works at: 5
℃
(41
℉
) for refrigerator, 0
℃
（
32
℉
）
for fresh zone and -18
℃
(0
℉
) for freezer. If you want to adjust the temperature or
functions manually, press any button to activate the control panel.
2. Refrigerator temperature adjustment: press button
D
on left-hand part of control panel multiple
times to cycle through temperatures from 2
℃
(36
℉
) to 8
℃
(46
℉
).
3. Freezer temperature adjustment: press button
E
on right-hand part of control panel multiple times
to cycle through temperatures from -15
℃
(5
℉
) to -25
℃
(-13
℉
).
4. Fast-cooling function: press button
B;
button illuminates and fast cooling function is turned on,
fridge will work automatically at temperature setting of 2
℃
(36
℉
). Mode expires
automatically after 24 hours operation and illumination of button ceases. Mode can be canceled
manually by pressing the button again.
5. Holiday function: press button
C;
button illuminates, holiday function is turned on and whole
appliance will work automatically at settings: fridge at 17
℃
(63
℉
) and freezer at -18
℃
(0
℉
).
6. Smart function: press button
F;
button illuminates, fridge compartment operates at setting 5
℃
(41
℉
) and freezer compartment works at setting of -18
℃
(0
℉
). The Fresh zone works at setting
of 0
℃
(32
℉
).
7.Fast-freezing function: press button
G;
button illuminates and freezer will operate at temperature
setting -25
℃
(-13
℉
). After 24 hours, fast freezing function quits automatically, or can be
ended manually at any time by pressing the button again.
8. Press button
H
for 3 seconds to switch off your appliance: the button lights up indicating unit is
powered but in a standby mode. Press the button
H
for 3 seconds to switch on your appliance.
9. Press the button
A
to temporarily turn on the display section corresponding to the fresh zone,
press the button
A
again to adjust the temperature. Temperature ranges of fresh zone from -3
℃
(27
℉
) to 3
℃
(37
℉
).
10. Fault display
This unit has a ‘Fault display & alarm’ function. If a fault is detected, there are alarms displayed on the
temperature display, the appliance still cools but professional service technician should be
called to check the appliance.
F1
–
Sensor of fridge evaporator
F2
–
Sensor of fresh zone
F3
–
Sensor of fridge compartment
F4
–
Sensor of freezer compartment
F5
–
Sensor of defrosting
2E
–
Fault of fan/motor in freezer
EC
–
Communication fault between main panel and display panel.
PS: Main board is located in the compressor compartment
CONTROLS
17
