background image

Periods of non-operation

When the appliance is not in use for long

periods, take the following precautions:

1.

Disconnect the appliance from

electricity supply.

2.

Remove all food.

3.

Clean the appliance and all accessories.

4.

Leave the door/doors open to prevent

unpleasant smells.

WARNING!

 If the cabinet will be

kept on, ask somebody to

check it once in a while to

prevent the food inside from

spoiling in case of a power

failure.

TROUBLESHOOTING

WARNING!

 Refer to Safety

chapters.

What to do if...

Problem

Possible cause

Solution

The appliance does not oper-
ate.

The appliance is switched
off.

Switch on the appliance.

 

The mains plug is not con-
nected to the mains socket
correctly.

Connect the mains plug to the
mains socket correctly.

 

There is no voltage in the
mains socket.

Connect a different electrical
appliance to the mains socket.
Contact a qualified electrician.

The appliance is noisy.

The appliance is not sup-
ported properly.

Check if the appliance stands
stable.

The lamp does not work.

The lamp is in stand-by.

Close and open the door.

The lamp does not work.

The lamp is defective.

Contact the nearest Authorised
Service Centre.

The compressor operates
continually.

Temperature is set incor-
rectly.

Refer to "Operation" chapter.

 

Many food products were
put in at the same time.

Wait some hours and then
check the temperature again.

 

The room temperature is
too high.

Refer to climate class chart on
the rating plate.

 

Food products placed in
the appliance were too
warm.

Allow food products to cool to
room temperature before stor-
ing.

The door is not closed cor-
rectly.

Refer to "Closing the door".

10

Summary of Contents for C7280NEP





















Reviews: