background image

Use

79

EN

2. Use the value increase 

 and value 

decrease 

 keys to set the number of 

minutes required.

3. Wait approx. 5 seconds without pressing 

any key to finish setting the minute 
minder. The current time and the symbols 

 and 

 appear on the display.

A buzzer will sound when the set time is 
reached.

4. Press the value decrease key 

 to turn 

the buzzer off.

Modifying the set data

1. Press the clock key 

.

2. Use the value increase 

 and value 

decrease 

 keys to set the number of 

minutes required.

Deleting the set data

1. Press the clock key 

.

2. Hold down the value increase 

 and 

value decrease 

 keys at the same 

time.

3. Then switch off the oven manually if 

cooking is in progress.

Selecting the buzzer

The buzzer can have 3 tones.

1. Hold down the value increase 

 and 

value decrease 

 keys at the same 

time.

2. Press the clock key 

.

Press the value decrease key 

 to select 

a different buzzer tone.

3.7 Cooking advice

General advice

• Use a fan assisted function to achieve 

consistent cooking at several levels.

• It is not possible to shorten cooking times 

by increasing the temperature (the food 
could be overcooked on the outside and 
undercooked on the inside).

• For the same total weight, cooking time 

will be greater for cooking a whole 
piece than when it is cut into smaller 
pieces.

Advice for cooking meat

• Cooking times vary according to the 

thickness and quality of the food and to 
consumer taste.

• Use a meat thermometer when roasting 

meat, or simply press on the roast with a 
spoon. If it is hard, it is ready; If not, it 
needs another few minutes cooking.

Slow cooking with the probe

•  This cooking mode is recommended for 

tender and lean meat whose core 
temperature should not exceed 65°C. 
Set the temperature of the oven to 
between 90° and 100°C. This 

The minute minder timer can be set 
from 1 minute to a maximum of 
23 hours and 59 minutes.

Summary of Contents for C6IMXI9

















































Reviews: