background image

Instructions

58

•  Deliver the appliance to the 

appropriate recycling centre for 
electrical and electronic 
equipment waste, or return it to 
the retailer when purchasing an 
equivalent product, on a one for 
one basis.

Our appliances are packaged in 
non-polluting and recyclable 
materials.
•  Deliver the packing materials to 

the appropriate recycling centre.

1.7 To save energy 

• Only preheat the appliance if the 

recipe requires you to do so.

• Unless otherwise indicated on the 

package, defrost frozen foods 
before placing them in the oven.

• When cooking several types of 

food it is recommended to cook 
the foods one after the other to 
make the best use of the already 
hot oven.

• Use dark metal moulds: They help 

to absorb the heat better.

• Remove all trays and racks which 

are not required during cooking.

• Stop cooking a few minutes 

before the time normally used. 
Cooking will continue for the 
remaining minutes with the heat 
which has accumulated inside the 
oven.

• Reduce any opening of the door 

to a minimum to avoid heat 
dispersal.

• Keep the inside of the oven clean 

at all times.

Plastic packaging

Danger of suffocation

•  Do not leave the packaging or 

any part of it unattended.

•  Do not let children play with the 

plastic bags.

Summary of Contents for C6IMXI9

















































Reviews: