Cleaning and maintenance
39
EN
Removing the tray support frames
Removing the tray support frames enables
the sides to be cleaned more easily.
1. Unscrew the fastening ring nuts
completely.
2. Remove the tray support frames from their
seats on the deflector and remove them
from the oven.
3. When you have finished cleaning,
reposition the tray support frames inside
the oven and fasten them with the
fastening ring nuts
.
4.4 Extraordinary maintenance
Removing the door seal
To remove the seal:
• Pull the seal outwards to remove it.
To refit the seal:
• Position the seal in the groove at the
front, then press carefully down on it until
it adheres to the face of the appliance.
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-
abrasive sponge and wash with
lukewarm water.
