13
11. CARTRIDGE
The tonearm and cartridge are factory installed and set up. It is advised that
post shipping transit a digital stylus pressure gauge is used to check that the
stylus pressure has remained at the factory setting of 2.3 grams.
Should the cartridge need to be replaced, observe the following guideline
points and refer to the tonearm manual.
1.
Before removal and installation of the cartridge, ensure that its stylus
guard is in position as a precaution against accidental damage.
2.
The Siltech silver cartridge leads have 1mm diameter receptacles for the
headshell and standard 1.25mm for the cartridge. The latter may require
adjustment with pointed nose pliers or a screwdriver blade for a snug fit
on non-standard terminals. Connections to the cartridge must never be
made by direct soldering.
3.
The cartridge lead colour coding is as follows:
Red - Right Channel
Green - Right Channel Ground
White - Left Channel
Blue - Left Channel Ground
4.
Replacement Siltech silver cartridge leads can be obtained direct
from SME.
Blue
White
Green
Red
Summary of Contents for Diamond MK2 Synergy
Page 1: ...INSTRUCTIONS...
Page 19: ...19...
