background image

 

 

Warning! Important Safety Instructions

 

CAUTION: 

RISK OF ELECTRIC SHOCK DO NOT REMOVE POWER SUPPLY UNIT COVER. 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE POWER SUPPLY UNIT COVER. 
THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. 
 

 

Please read this manual carefully and keep it in a safe place for future reference. 

 

The slots in the Power supply unit at the back and underside are provided for necessary ventilation. To 
ensure reliable operation of this apparatus, and protect from overheating, these slots must never be blocked 
or covered. 

 

Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock. 
Do not expose this apparatus to rain or place it near water. 

 

If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately. 

 

You can clean this apparatus with a damp cloth when necessary, but be sure to unplug the apparatus first. 
To cut off the power source, unplug the apparatus from the wall outlet. 

 

Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or 
electric shock. 

 

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed 
upon or against them, paying particular attention to cords at the plug end, adaptors and the point they exit 
from the appliance. 

 

Before connecting the AC power cord to the Power supply unit, make sure the voltage of the Power supply 
unit, as marked on the label at the rear, corresponds to the local electricity supply. 

 

Never insert anything metallic into the open parts of this apparatus. 

 

Only a qualified technician should remove the Power supply unit cover. 

 

Be sure to hold the plug, not the cord, when disconnecting this apparatus from an electric socket. 

 

Locate this apparatus near an easily accessible AC outlet. 

 

If this apparatus does not operate normally, in particular if there are any unusual sounds or smells, unplug it 
immediately and consult an authorized dealer. 

 

Unplug this apparatus from the AC outlet before any service. 

 

IMPORTANT NOTICE: 

The mains lead on this equipment when supplied for use in the UK, is fitted with a moulded plug incorporating a fuse. The value 
of the fuse is indicated on the pin face of the plug and if it required replacing a fuse approved to BSI 1362 of the same rating 
must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If the plug fitted is not suitable for the 
power  points  in  your  house  or  the  cable  is  not  long  enough  to  reach  the  power  point,  you  should  obtain  a  suitable  safety 
approved extension lead or consult your dealer for assistance. However, if there is no alternative but to cut off the plug, remove 
the fuse first and then safely dispose of the plug. DO NOT connect the plug to a mains socket as there is a risk of shock hazard 
from the bared flexible cord. 

 

IMPORTANT: 

The wires in the mains lead are coloured in accordance with the following code: 

BLUE  NEUTRAL,  BROWN  LIVE. 

As these 

colours  may  not  correspond  to  the  coloured  markings  identifying  the  terminals  in  your  plug,  proceed  as  follows:  The  wire 
coloured  BLUE  must  be  connected  to  the  terminal  marked  with  the  letter  N  or  coloured  Blue  or  BLACK.  The  wire  coloured 
BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED. 

 

WARNING: 

DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE LETTER E OR BY 

THE

 

EARTH SYMBOL

   

  

I

 OR COLOURED GREEN OR GREEN AND YELLOW. 

 

 

WEEE SYMBOL INFORMATION 

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 

 

(Applicable to the European Union and other European countries with separate collection system). 

The  marking  shown  on  this  product  or  its  literature,  indicates  that  it  should  not  be  disposed  with  other  household  wastes  at  the  end  of  its 
working  life.  To  prevent  possible  damage  to  the  environment  or  human  health  from  uncontrolled  waste  disposal,  please  separate  this  from 
other types of wastes and recycle it responsibly to promote the sustainable re-use of material resources. 
 
Household  users  should  contact  either  the  retailer  where  they  purchased  this  product  or  their  local  government  office,  for  more  detailed 
information of where and how they can take this item for environmentally safe recycling. 
 
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed 
with other commercial wastes for disposal. 

Summary of Contents for 30/12

















Reviews: