∗
Refer to the back cover for
identification method.
Pad form
BM
Bellows type with groove
UM
Flat type with groove
BM
BM
w
Weight Difference by Material
[g]
Pad diameter/form Silicone rubber Urethane rubber
FKM
ZHP63BM
−2.9
0
20.3
ZHP80BM
−5.0
0
35.1
ZHP63UM
−1.5
0
10.6
ZHP80UM
−2.1
0
15.5
RoHS
How to Order
Pad diameter
63
ø63
80
ø80
Exhaust release
S
Silencer exhaust
Pad material
N
NBR (Black)
∗
S
Silicone rubber (White)
U
Urethane rubber (Brown)
F
FKM (Black)
∗
Mounting
Symbol Type
Thread
Size
A
Metric
size
Male
thread
M8
B
M10
C
Female
thread
M8
D
M10
E
Inch
size
Male
thread
5/16-18UNC
F
3/8-16UNC
G
Female
thread
5/16-18UNC
H
3/8-16UNC
Ejector/
Nozzle nominal size [mm]
07
Nozzle: ø0.7
10
Nozzle: ø1.0
12
Nozzle: ø1.2
15
Nozzle: ø1.5
Supply (P) port
Symbol Type
Port size
C4
Metric
ø4 One-touch fitting
C6
ø6 One-touch fitting
N3
Inch
ø5/32" One-touch fitting
N7
ø1/4" One-touch fitting
B
B
N
N
ZHP
ZHP
80
80
With ejector
Without ejector
10
00
Ejector Specifications
ZHP
-07
l
ZHP
-10
ZHP
-12
ZHP
-15
Nozzle nominal size [mm]
0.7
1.0
1.2
1.5
Max. suction flow rate [L/min (ANR)]
∗
30
51
62
77
Air consumption [L/min (ANR)]
∗
24
40
58
87
Vacuum pressure reached [kPa]
−91
Standard supply pressure [MPa]
0.35
∗
Standard supply pressure
Recommended Work Load
[N]
ZHP63
ZHP80
Horizontal lifting
66
106
Vertical lifting
33
53
Use this product with the recommended work
load or less. The transfer work over the
recommended work load may cause the
vacuum pressure to decrease by the air leak.
The work load shown above is the value when
the vacuum pressure reaches –85 kPa, and that
is calculated by multiplying the theoretical value
by a safety factor of “1/4” for the horizontal lifting
or “1/8” for the vertical lifting. For details, refer to
the Vacuum Equipment Model Selection in the
Best Pneumatics No. 4 catalog. The vacuum
pressure reached may vary depending on the
workpiece (permeability, etc.) Calculate the
actual work load in accordance with the vacuum
pressure reached.
Response Time
[ms]
ZHP
BM
-07
ZHP
BM
-10
ZHP
BM
-12
ZHP
BM
-15
ø
63
295
143
120
86
ø
80
455
221
190
140
Response time means a period of time that the vacuum pressure reaches –57 kPa after the externally
installed valve has been turned ON when the bellows type pad is used and the supply pressure is 0.35 MPa.
Nozzle size
Pad dia.
Weight
Material: NBR, Mounting:
A
[g]
ZHP63BMNA-
C6S
184
ZHP80BMNA-
C6S
224
ZHP63UMNA-
C6S
167
ZHP80UMNA-
C6S
175
For the ZHP
A-00 (without ejector), weight shown above –12 g.
When the mounting symbol is other than “A”, add the weight
q
shown in the table on
the right to the weight described in the table above.
When the material is other than NBR, add the weight
w
shown in the table on the
right to the weight described in the table above.
This weight includes the accessory weight.
q
Weight Difference by Mounting Style
[g]
B
C
D
E
F
G
H
20
−5
14
7
25
1
11
S
Vacuum Pad with Ejector
Series
ZHP
ø
63, ø80
C6
2