For pressure loss improvement
S coupler:
Series
KK
With a structure that employs no steel
balls, the coupler achieves a slim body
without narrowing of the channel, allow-
ing coverage of a wide effective area.
By not blocking the channel with the
valve spring, the loss of effective area
can be minimized.
This structure achieves smooth flow
through the channel.
쮿
Conical structure of
check valve tip
쮿
Smooth channel with
minimal unevenness
쮿
Special method of
connection and fixation
Improved fitting’s restrictor and leakage
The surface-to-surface design allows
super-tight sealing.
쮿
Seal structure with
minimal leakage
Blow Gun, Coil Tube and S Coupler Selection
Energy Saving Flow
Related Product
Recommended system in
accordance with the distance
Air guns with an effective area around 6 mm
2
are most commonly used.
But the SMC blow gun achieves a 30 mm
2
effective area.
Method
Process
Effects
Features
Energy saving!
So
Thus…
Required less air consumption
Effective discharge at low pressure
Smaller nozzle diameter
Lower discharge pressure
from compressor
Reduction in the amount of electricity
consumed by compressor
Pressure drop:
Small
High pressure right before the nozzle
Effective area:
Large
TCU0604-20-1-X6
KQ2H06-02S
Up to 20 mm
VMG1
쏔쏔
-02-01
KK4P-06H
ø1
TCU0604-20-1-X6
KQ2H06-02S
Up to 40 mm
VMG1
쏔쏔
-02-02
KK4P-06H
ø1.5
TCU0805-20-1-X6
KQ2H08-02S
Up to 60 mm
VMG1
쏔쏔
-02-03
KK4P-08H
ø2
TCU1065-20-1-X6
KQ2H10-02S
Over 60 mm
VMG1
쏔쏔
-02-04
KK4P-10H
ø2.5
Distance
Nozzle size
Coil tube
Fitting
Blow gun
Recommended system
S coupler
Energy saving effects are enhanced through the appropriate
blow gun model selection in accordance with the distance from
the target object.
As a result…
Features 3
VMG-D.qxd 10.1.15 4:19 PM Page 4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
