SMC Networks TigerSwitch SMC6726AL2, Installation Manual

Page: 26 / 78

A
BOUT THE
T
IGER
S
WITCH
10/100
1-6
Power Supply Receptacle
The power receptacle is located on the rear panel of the switch. The
standard power receptacle is for the AC power cord.
Figure 1-4 Power Supply Receptacle
Features and Benefits
Connectivity
• 24 100BASE-TX ports for 10 or 100 Mbps Ethernet connections.
• 2 1000BASE-T ports (shared with SFP slots) for easy Gigabit Ethernet
integration and for protection of your investment in legacy LAN
equipment.
• Auto-negotiation enables each RJ-45 port to automatically select the
optimum communication mode (half or full duplex) if this feature is
supported by the attached device; otherwise the port can be configured
manually.
• RJ-45 ports support auto MDI/MDI-X pinout selection.
• Unshielded (UTP) cable supported on all RJ-45 ports: Category 3 or
better for 10 Mbps connections, Category 5 or better for 100 Mbps
connections, and Category 5, 5e or 6 for 1000 Mbps connections.
100-240V~ 50-60Hz 0.8A