SMC Networks TigerSwitch 100 SMC6924VF, Management Manual

Page: 59 / 174

U
SING THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-43
You can use the Port Trunking Configuration screen set up port
trunks as shown below:
Port Trunking Configuration
===========================
Trunk ID Status Member List
1 2 3 4
--------- -------- ----------- ----------- ----------- -----------
-- -------- Unit : - Unit : - Unit : - Unit : -
Port : -- Port : -- Port : -- Port : --
-- -------- Unit : - Unit : - Unit : - Unit : -
Port : -- Port : -- Port : -- Port : --
-- -------- Unit : - Unit : - Unit : - Unit : -
Port : -- Port : -- Port : -- Port : --
Trunk ID : 1 Trunk ID : 1 Member Unit : 1
Member Port : 1
[Show] [More]
[Enable] [Disable] [Add] [Delete]
<OK>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
Trunk ID Configure up to five trunks per switch.
Status Shows if the selected trunk is enabled or disabled.
Unit Specifies a switch unit in the stack (1~4).
Port Select from 2 ~ 4 ports per trunk.
[Show] Displays trunk settings, where the first trunk listed
is specified by “Trunk ID.”
[More] Scrolls through the list of configured trunks.
[Enable] [Disable] Enables/disables the selected trunk.
[Add] [Delete] Adds/deletes the port specified by
Trunk ID / Member Unit / Member Port.